Art. No. 34000-E
Dimension: B: 15,0 H: 205,0 T: 36,0 cm weight: 16.00kg
The shower can be ordered entirely in stainless steel or from a combination of stainless steel and brass
The basic module contains the shower arch, a chrome-plated shower plate Ø 20 cm and the water dispenser, the double valve for the hot and cold water supply with corresponding rotary handles, as well as an additional tap and a connection set.
The other connection to the water dispenser is provided with a blind plug. If another tap is required, it can be installed here. If this is the case, the faucet must be ordered additionally, as only one faucet is included in the standard scope of delivery.
We also recommend a base to securely mount the shower.
You will also find many other shower plates in different sizes, shapes and colors on our website.
Further special adaptations are possible on request.
• Shower bow
• Shower plate Ø20cm
• Rotary handle cold / warm
• Faucet 40.427
• Water dispenser
• Connection set
• Shower plate Ø25cm
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.