Art. No. DG33000-M
Dimension: B: 15,0 H: 205,0 T: 36,0 cm weight: 15.00kg
33000 - Water pump with shower
The shower can be ordered in stainless steel or from a combination of stainless steel and brass.
The basic module contains the shower bow and the water pump, the valve for the cold water supply with the appropriate rotary handle, as well as an additional faucet and a connection set consisting of a roll of Teflon tape.
The other connections on the water pump are equipped with blind plugs. If further taps are desired, they can be installed here. If this is the case, the additional taps must be ordered additionally, as only one faucet is included in the standard scope of delivery.
Please note that no shower head is included. This must be ordered as desired.
In addition, we recommend a plinth to securely mount the shower.
Further special adjustments are possible on request.
• Shower bow
• Rotary handle cold
• Tap 1X
• Water pump
• Connection set
• Shower head
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.