garden shower cold/hot 6*235*35cm
Accessories see product description

The basic module contains the shower bow, a chrome-plated effervescent plate of 20 cm, the double valve for the hot and cold water supply with appropriate rotary handles, as well as a connection for an additional faucet, the base plate and a connection set.
If no additional faucet is desired, the connection is provided with a blind plug to allow a later installation.
Please note that no faucet is included. This must be ordered as desired.
In addition, we recommend a plinth to securely mount the shower.
On our website you will also find many more effervescent plates in different sizes, shapes and colours.
Further special adjustments are possible on request.

Included:
• Shower bow
• Effervescent Ø20cm
• Rotary handles hot/cold
• Connection set
• Base plate

Optional:
• Faucet
• Socket
• Effervescent plate of 25cm/40cm

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.