Garden shower cold/warm
Accessories see product description

The basic module contains the shower elbow, a chrome-plated shower plate Ø 20 cm, the basic body, the double valve for the hot and cold water supply with corresponding rotary handles, as well as a connection for an additional tap, the base plate and a connection set.
If no additional water tap is required, the connection is provided with a blind plug to enable later installation.
Please note that no faucet is included. This must be ordered as required.
We also recommend a base to securely mount the shower.
You will also find many other shower plates in different sizes, shapes and colors on our website.
Further special adaptations are possible on request.

Included:
• Shower bow
• Effervescent Ø20cm
• Rotary handles hot/cold
• Connection set
• Base plate

Optional:
• Faucet
• Socket
• Effervescent plate of 25cm/40cm

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.