Well socket Ø 30 H: 35 cm

well base in stainless steel matt as Design object
Storage area for pouring can with water running inward to drain rust. Soft rounding, shadow joint on base floor, internal mounting frame with concealed fixing screws and internal drain d = 100 mm for KG100 connection.

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.