Design Fountain Stele 30x15 cm High: 110 cm

Design Water Tab Stele Measures: 30 x 15 cm, height 110 cm
With rounded edges, rear revision door including connected installation and 1x tap connection on the front
(Without tap-without spout-please select according to your wishes and order to do so)
Timeless design-first-class quality and innovative accessories characterize this stele, an architectural statement in the private garden, urban environment, public urban space, park or cemetery complex.

2 pieces fastening screws in stainless steel 12 x 120 mm with U-discs.

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.