Shower wall arm 40 cm

The simple shower arm made of stainless steel has a diameter of 30 mm and a projection of around 400 mm.
On the wall and at the front, ½ “connections are built in to enable quick and easy installation
Please note that no shower plate is included. This must be ordered as required.

Accessories:

Included:
• Basic body

Optional:
• Shower plate
• Rosette
• Rotary handle

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.