Overview Wall water basin Bild 1-12 von 18
Art. No. 40.555
Dimension: B: 3,4 H: 8,2 T: 11,0 cm weight: 0.80kg
Wall fitting in stainless steel or bronze with set drinking water dispenser in chrome (40,747) The filigree water jet bubbles as long as the button is pressed.
The water steel bow can be adjusted from the front.
Assembly like a normal faucet.
Easy to mount:
The water connection in this model is equipped with a turning system and so always fits-promised!
No matter if your connection thread has ½ "or ¾" – inside or outside thread!!
The attached patent-turning nipple with hexagon socket allows this variable assembly.
This drinking water dispenser has been installed everywhere for health ...
Whether sauna-shopping centres-public places-spa gardens or schools simple installation
Before the frost the taps completely with the water pipeline to empty and leave the toggle of the tap on central position untwisted.
In the spring before closing the tap only briefly untwist and flush your piping, in order to remove rust or other particles from the line, close only after it the tap. Nevertheless once a sand grain should have settled into the seal and the cock drips, can you upper section unscrew and the seal once turn, so that the unused side can seal, or you use a new commercial seal. So you enjoy long your KULL - garden tap, since it seals low-friction, even if small sand particles come, it will problem-free close - without dripping.
Tipp zu Drehventil-Oberteil- Keramikventil:
Tipp zu Drucktaster-Oberteil - Selbstschlussventil:
Tipp zu Becken und Brunnen:
Tipp zu Frühjahres - Wartung:
So werden Sie lange Freude an den Armaturen haben.