Home Watertap classic Wall mounting spout Toscana Water outlet with console 60,3X50cm
Art. No. 40.337
Dimension: B: 13,5 H: 29,0 T: 50,0 cm weight: 4.50kg
for attention to detail...
Sometimes it is "only" details with the certain extra which make the special. This handmade fountain spout made of solid stainless steel is durable, stylish and smart.
The hard-wearing powder coating and the artistically applied patina emphasize the interaction of material and form.
This water spout has no connection thread at the rear...
Since the long rosette could scratch the wall when turning it on.
There is also no need for a thread, as no water backpressure can be made – simply apply a little silicone to the back of the wall rosette before mounting and screw it, possibly the thread or the supply hose 1/3tel into the spout would be pure Optimal (inside diameter 54 mm).
In enclose contained:
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.