Art. No. 40.794-30
Dimension: B: 30,0 H: 12,0 T: 3,0 cm weight: 0.60kg
The Fountain Inlet with its swan neck in stainless steel matt or bronze is designed for traditional as well as contemporary design of water bodies. Connection internal Thread 3/4 "
Easy to mount:
The water connection in this model is equipped with a turning system and so always fits-promised!
No matter if your connection thread has ½ "or ¾" – inside or outside thread!!
The attached patent-turning nipple with hexagon socket allows this variable assembly.
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.