garden tap (no Rosett)
Dimension:
B: 4,0 H: 9,0 T: 15,0 cm
weight: 1.40kg
With the KULL water tap, on a historical basis you transform each water place into a beautiful eyecatcher, paired with Design, Function and longevity. Weather-proof aluminum art casting, High-grade steel and brass connections, the strainable powder coating connected with the warm, by hand laid on patina, lend the special note.
Easy to mount:
The water connection in this model is equipped with a turning system and so always fits-promised!
No matter if your connection thread has ½ "or ¾" – inside or outside thread!!
The attached patent-turning nipple with hexagon socket allows this variable assembly.
In enclose contained:
4 pieces KULL mounting screws in stainless steel bronze 4.5 x 50 mm
Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.
Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.
PRINT