classic garden tap 1/2"
Dimension:
B: 2,6 H: 8,5 T: 9,5 cm
weight: 0.30kg
brass faucet without hose connection ' Grandma's Garden classic '...
or a "stylish element"
1/2 "faucet in bronze with a traditional gag handle in a long-lasting design.
Massive craftsman quality for indoor and outdoor
An outlet valve with DVGW approval in the retro style of Kull-design-simple and functional-reduced to the essentials and with the matching wall rosette or at larger wall distances of an extension a casual mix with modern design can arise.
In detail:
• Connection thread Inlet: 1/2 "External thread
• Front water outlet: with centering star for more uniform water flow
• Valve Body: brass CR
• Upper part: Gag T-handle with rising spindle and flat gasket
• O-Ring seal: NBR with KTW/w 270 approvals
• Maximum operating temperature: 90 °c
• Maximum working pressure: 10 Bar
• Weight: 0.3 kg
• Dimensions: 9.5 cm, Height 8,5 cm, Width 2,6 cm
standards:
• Euronorm Drinking Water Ordinance-DVGW Approval
• Threaded connection ISO228 (complies with DIN EN ISO 228/BS EN ISO 228
Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.
Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.