classic garden tap

• Connection thread inlet: 1/2 “external thread • Water outlet at the front: with thread for the hose connection in 3/4 " • Valve body: brass CR powder-coated • Upper part: T-handle toggle with rising spindle and flat seal • O-ring seal: NBR with KTW / W 270 approvals • Maximum operating temperature: 90 ° C • maximum operating pressure: 10 bar • Weight: 0.2 kg • Dimensions: projection 10 cm, height 9 cm, width 2.6 cm Norms: • Euronorm Drinking Water Ordinance - DVGW approval • Thread connection ISO228 (corresponds to DIN EN ISO 228 / BS EN ISO 228

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.

Please note our general operating instructions:
rinse
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.