Overview Connecting units Bild 1-12 von 171
Art. No. 40.429E1
Dimension: B: 4,5 H: 15,0 T: 10,0 cm weight: 0.80kg
This Tap is turned in at the proposed Connector at the top of the Fountain.
For a second Garden hose ... Or You keep a Tap free to fill a Pot ... Or for Hand Washing ... Just practical.
In addition, can also be combined with a Hose Console.
All common hose clutch systems fit the included hose closure piece.
Top flat-tight with rising Spindle for easy Maintenance.
• The Faucet has a built-in Back flow Control At the Bottom of the Neck.
• At the Front is a Safety Valve with Pipe Ventilator and Backflow Control
Before the frost the taps completely with the water pipeline to empty and leave the toggle of the tap on central position untwisted.
In the spring before closing the tap only briefly untwist and flush your piping, in order to remove rust or other particles from the line, close only after it the tap. Nevertheless once a sand grain should have settled into the seal and the cock drips, can you upper section unscrew and the seal once turn, so that the unused side can seal, or you use a new commercial seal. So you enjoy long your KULL - garden tap, since it seals low-friction, even if small sand particles come, it will problem-free close - without dripping.
Tipp zu Drehventil-Oberteil- Keramikventil:
Tipp zu Drucktaster-Oberteil - Selbstschlussventil:
Tipp zu Becken und Brunnen:
Tipp zu Frühjahres - Wartung:
So werden Sie lange Freude an den Armaturen haben.