Overview Connecting units Bild 1-12 von 153
Art. No. 40.637E
Dimension: B: 3,0 H: 3,0 T: 10,0 cm weight: 0.60kg
1/2" extension of 3 x10 cm, IG/AG, matte
Installation without hemp or PTFE band
The KULL DESIGN components, equipped with PTFE thread density rings, are simply assembled and allow for repeat assembly and corrective rotation.
The sealing rings have an elastic magnification during application, thread and adjustment to the groove, which guarantees safe use.
These threaded seals have been the most well-known in the world for several years.
At present none
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.