Overview Connecting units Bild 1-12 von 154
Art. No. 40.401
Dimension: B: 3,2 H: 3,2 T: 2,6 cm weight: 0.08kg
3/4 "Connection sleeve 26 mm, IG/AG with internal gearing for 17er-Imbus mounting keys.
is required for the centering and securing of the rosettes.
Ideal for the Turning connection (45,053) which can be turned in the internal thread.
At present none
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.