Overview Connecting units Bild 1-12 von 153
Art. No. 40.366-10E
Dimension: B: 3,0 H: 3,0 T: 10,0 cm weight: 0.23kg
3/4 inch stainless steel
Easy to mount:
The water connection in this model is equipped with a turning system and so always fits-promised!
No matter if your connection thread has ½ "or ¾" – inside or outside thread!!
The attached patent-turning nipple with hexagon socket allows this variable assembly.
incl. 40.424 transition
At present none
Universal connector – Reversing nipple 45.053 as thread transition and extension
3/4" outer thread with 1/2" inner thread and 1/2" outer thread.
With inner multi-tooth (12-man Imbus key) - for easy installation!
This KULL design patent sandipple with hexagon allows variable mounting ...
whether on the construction side internal or external thread - 1/2" or 3/4" is available.
The connection thread always fits!!
Please note our general operating instructions:
pipe thoroughly before (re-)commissioning with approx. 3-4 litres of water to remove and remove dirt.
water pressure of 6 bar must not be exceeded.
- Completely empty water-carrying elements in the outdoor area before the first frost (blow out with compressed air if necessary) and, if possible, dismantle them.
- rooster not too tightly to turn, but only until it closes completely.
stainless steel fittings regularly (with our cleaning and care product Art.-No. 45.083).
- Do not use sharp cleaning agents in paint surfaces, instead we recommend our cleaning agent (Art. No. 45.083) to avoid possible damage to the fittings.